Access Intenet From Mobile Using Computers Internet Connectionr

Access Intenet From Mobile Using Computers Internet Connectionr
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------


share this post with those who want to
use their pc broadband from mobile...
some foolish people buy a wi-fi router
for this
they dont no that it can be done by
simple blutooth dongle

Yes, you read it right. I am not talking
about using mobile to access internet
on your PC. Its the opposite I am
demonstrating here. So you will be
able to use FREE internet on mobile

1)you need nokia s60 mobile

2)blutooth pc dongle

3)download gnubox vergin for your
s60 from here http://pub.rtcamp.com/
mobile/gnubox/

4)download mrouter from google

5}
Download and install AnalogX at:
http://www.analogx.com/files/
proxyi.exe

This enables you to share your internet
connection.

Pls install your gnubox on ur phone
first...

Install mRouter on your PC also..
ON YOUR PC (Microsoft BT stack)
Switch on BT on ur PC and ur fone.

Step1: Right click the BT icon in the
system tray, "Open Bluetooth Settings"
go to "COM Ports".
If it is blank, click on "Add"->
"Incoming (device initiates the
connection)"
Look at the COM number...mine is
COM4. it varies...let's put it as COM#

Step2: Go to "Control Panel" -> "Phone
and Modem options". Select the tab
"Modem"
Add a modem. Check the box saying
"Don't detect modem".
Select the type as "Communications
cable between two computers"
connected on Bluetooth Serial Port
COM#

Step 3: Go to "Control Panel" ->
"network connections". Create a new
connection
"setup advanced connection" -->
"accept incoming connections" -->
select ur COM# and uncheck other
connections/modems and leave the
rest of the stuff as it is and then
continue and finish.

Step4: Right click on the mRouter icon
on the system tray go to "Connected
Device"
Refresh the page until it discovers ur
phone. Select your fone in the device
selection
screen and click "Next>".
Uncheck the box where it says
“Automatically connect to this device
when it is in range”
and click "Finish"

Step5: Now right click on the m-Router
taskbar icon and click on "Advanced
Settings"
Click on the View button under
"Additional COM Ports"
Select the COM Port used by your
Bluetooth device (COM#)
After setting the COM Port, click "OK"
Under connectivity methods, look for
Additional COM Ports and expand it to
make
sure your COM port is there. Click
"Close"
Make sure that there is no error
message...

Now that our m-Router is all set, let’s
configure Gnubox!!

GNUBOX!!

Step1: On the phone, Go to "Tools"-
>"Settings"->"Connection"->"Access
points"
Go to "Options"->"New access point"-
>"Use default settings"
Name it 'Bt' .
Make sure you set it to use 'Data call'
as the bearer.
Set the number to call to something
that cannot be called (e.g 321),
username as abc, password: xyz
Leave the rest as it is...
Then, "Options"->"Advanced Setting"
Leave all untouched EXCEPT "Proxy
Port Number".
enter it as 6588

Step2: Start GnuBox.
Now you should see on the screen that
the DialOutISP record is found,
and the phone number you just
entered is printed on the screen.
However, the ModemBearer should
still show 'No rec'.
- Select "Options"->"Install"->"Create
records"
- Exit gnubox with "Options"->"Exit"
- Start GnuBox again.
- Now you should see on the screen
that the ModemBearer is shown and
the 'No rec' error is gone.
- Create the bluetooth pairing between
your phone and the computer.
- Launch GnuBox. Select "Install"->"Set
RAS login script"
- Then select "2box bluetooth"->"Serial
port"
- On the upcoming device selection
dialog, select your computer,
and in the question about encryption
click Yes (or OK if you only have that).
- Launch your phone browser and